|
|
Rapid Tooling (Silicone Mould & Vacuum Casting)
RPWORLD offer rapid tooling (silicone mould & vacuum casting) service with perfect quality and prompt lead time to global clients.
Rapid tooling is a low volume production method that produces parts from a Polyurethane plastic material for prototyping purposes and Q&A check.
These parts have material properties similar to production like plastics. It is possible to make these parts appear just like hard tooled plastic parts by means of surface finish, color, accuracy, and material properties.
Rapid tooling are ideal for marketing samples, testing prototypes, or other situations where a few, 5-100, pieces are required but the time and money does not allow a prototype injection-molding tool to be produced.
 Procedure
 Step1. Make prototype and finish it
Step2. Production of silicone mould
Step3. Replication of polyurethane parts via vacuum casting
Step4. After treatment |
 |
Rubber performance polyurethane casting parts(Shore A50 hardness)
*Polyurethane resin can simulate the performance of rubber, hardness range from Shore A30 to Shore A85. |
 |
 |
| ABS performance polyurethane casting parts |
 |
 |
|
|
